• Frequency band: Operates in a range of 50Hz to 3.8GHz, ideal for broadband energy detection with flat input and output responses. • High dynamic range: The input dynamic range can reach up to 65 dB, with an input varying from -75 dBm to 16 dBm. It provides high accuracy and linearity with a precise linear output voltage in dB, 50 mV per dB. • Wide utility: The AD8362 true RMS power detector offers waveform-independent measurement results, detecting RF power from complex modulations such as CDMA, W CDMA, 8PSK, QAM, and 0FDM. It is suitable for IS95, CDMA2000, 3GPP, GSM/EDGE, MMDS, and other broadband access devices. • Power measurement mode: The VOUT and VSET pins are directly connected, and the output voltage is proportional to the logarithm of the effective input power value. For every 1 dB increase in input, the output voltage Vout increases by 50 mV, up to Vs 0.1 V. This mode is ideal for use as a power meter or for power detection in equipment. • Controller mode: Set a reference voltage value at the VSET end. When the power voltage value detected by AD8362 is greater than the reference voltage value, the Vout voltage outputs a high. When the power voltage value detected by AD8362 is less than the reference voltage value, the Vout voltage uses AD8307 to measure the power. The typical linear slope is 0.025V/dB, and the measurement range is -75 dBm to +16 dBm. Equipped with a shielding case and anti-backlash connection protection diode. • Specifications: Item type: RF power meter, Material: Aluminum alloy, Model: AD8362, Power supply voltage: DC 6V-15V, Frequency: 50 Hz-3.8 GHz, Dynamic range: 65 dB, Frequency detector: -75dBm - 16dBm. • How to use: Take out the product and connect the antenna to use.