Computers
IT & Electronics
Supermarket
Toys
Home
DIY & Garden
Large Appliances
Fashion
Acrylic paints
New product
-50 %
Bruguer Colors of the World Wall and ceiling paint Egypt Soft Ochre 4 L Matte Single-coat
14,99 €
VAT included
30,00 €
Save15,01 €
Ref: 00875804
Estimated delivery 26/08/26 from
5,99 €SOLD OUT
• Water-based acrylic plastic paint for interior walls and ceilings.
• Matte finish in Egypt Soft Ochre.
• Single-coat formula offering full coverage with one coat.
• Odorless paint that does not splash during application.
• Approximate yield of 10-12 m²/L.
• Touch-dry time of 30 minutes and recoat in 3 hours.
• Paint with optimal resistance and proven washability.
• Intense color that lasts over time and does not yellow.
• Easy to apply with brush or roller.
Similar
New product
7,99 €15,00 €
Bruguer Acrylic 5057500 Multi-surface Enamel Satin Tuscan Brown 750 ml
SOLD OUT
New product
9,99 €25,00 €
Titanlux 00T054434 Eco-Friendly Water-Based Enamel Glossy Tobacco 750 ml
SOLD OUT
Technical specifications
Characteristics
Color name:
Soft ocher Egypt
Product type:
Paint
Product form:
Ready-mixed
Suitable for outdoor use:
No
Suitable for indoor use:
Yes
Best uses:
Universal
Composition:
Water-based
Suitable location:
Universal
Opacity level:
High opacity
Color range:
Not applicable
Surface coverage:
12 m²/L
Yield (min.):
10 m²/L
Yield (max.):
12 m²/L
Finish type:
Matte
Paint volume:
4 L
Contains volatile organic compounds (VOC):
30 g/l
Volatile organic compound (VOC) emission class:
A
Volatile organic compound (VOC) content labeling system:
High (25 - 50%)
Application temperature (max.):
35 °C
Application temperature (min.):
5 °C
Drying time:
0.3 h
Repaint after:
3 h
Number of coats:
1
Quick dry:
Yes
Washable:
Yes
Splatter-free:
Yes
Wear-resistant:
Yes
Dispenser type:
Can
Easy to apply:
Yes
Easy to use:
Yes
Dispenser material:
Plastic
Waterproof:
Yes
Easy to clean after drying:
Yes
Surface preparation:
Previous preparation: The surfaces to be painted must be dry and clean of dust, efflorescence, rust, grease, wax, etc. and properly primed. If it is one of the following surfaces, prime them properly. New surfaces: (unpainted) Dead or dusty plaster: Prime with Universal Fixing Preparation or Brufix. Finishing: Apply Colors of the World Matte Plastic Paint. Painted surfaces: If the surface is in good condition, clean and apply Matte Plastic Paint Colors of the World without dilution.
If the surface is in poor condition, with cracks, chipped, tempera or lime, before painting it must be previously repaired and primed with the Universal Fixing Preparation or Brufix.
For painting other materials or specific situations not contemplated in this Technical Data Sheet, consult our Commercial Technical Service.
Instructions for use:
Apply with brush, roller or spray gun. Ready-to-use paint. For spray gun dilute conveniently.
Environmental conditions
Operating temperature range:
5 - 35 °C
Packaging content
Quantity per pack:
1 piece(s)
